Menu
User’s guide Guía del usuario
- Altec Lansing Inmotion Im3 User Manual Free
- Altec Lansing Inmotion Im3c Manual
- Altec Lansing Inmotion Im3 Manual
- Altec Lansing Ima699 Manual
- Altec Lansing Inmotion Im310
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
View and Download Altec Lansing InMotion iM3 user manual online. Altec Lansing Technologies User's Guide Speaker System iM3. InMotion iM3 Docking Speakers.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Caution: To prevent the risk of electric shock, do not remove cover (or back). No userserviceable parts inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CONNECTING THE POWER CORD (AC WALL SOCKET)
Snap plug into power supply and then insert the blades into the outlet. The power supply may be plugged upside down with no effect on product. Please note, the inMotion iMX2 can also be powered with four AA batteries (not included).
IMPORTANT SAFETY INSTRUCTIONS
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
Altec Lansing Inmotion Im3 User Manual Free
5.Do not use this apparatus near water — This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.No naked flame sources, such as lighted candles, should be placed on the apparatus.
10.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
11.Protect the power cord from being walked on or pinched — particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
12.Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.
13.Power source — Use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply — use only manufacturer-provided power supplies.
14.Unplug this apparatus during lightning storms or when unused for long periods of time.
15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Altec Lansing service line for assistance.
16.For products which incorporate batteries, please refer to local regulations for proper battery disposal.
ALTEC LANSING TECHNOLOGIES, INC. ONE YEAR LIMITED WARRANTY
What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.
What Is The Period Of Coverage?: This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.
How To Get Warranty Service: To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email ([email protected]). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing.
In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer’s expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.
How Will State Law Affect Your Rights?: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.
CUSTOMER SERVICE
The answers to most setup and performance questions can be found in the Troubleshooting guide. You can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you still can’t find the information you need, please call our customer service team for assistance before returning the speakers to your retailer under their return policy.
Tel: 800-258-3288
Email: [email protected]
For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.
INMOTION IMX2
MOBILE AUDIO DOCK
Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of desktop environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen
to this!
BOX CONTENTS
•inMotion iMX2 Mobile Audio Dock
•Home antenna cable adapter
•3.5 mm stereo cable (for secondary input)
•Power supply
•Protective carry bag
•User’s guide and quick connect instructions
COMPATIBLE XM2GO RECEIVERS:
Works with:
•Delphi MyFi XM2go receiver
•Pioneer Airware XM2go receiver
•Tao XM2go receiver
PLACING THE INMOTION IMX2
Position the inMotion iMX2 on a level surface, preferably close to you.
For live reception of XM satellite radio programing
Outdoor use
When outdoors, make sure your XM2go receiver and inMotion iMX2 mobile audio dock have an unobstructed view of the southern sky.
Note: If you are unable to receive any XM signals, we suggest you plug in the home antenna according to the indoor instructions below.
Indoor use
When indoors, connect the XM Radio home antenna that came with your XM2go receiver directly to the XM2go receiver (not to the inMotion iMX2 mobile audio dock), as follows:
•Locate the home antenna cable adapter included with the inMotion iMX2.
•Insert the home antenna cable adapter’s 3.5mm cable into the XM2go receiver’s headphone jack. This will de-activate the XM2go receiver’s internal FM transmitter.
•Insert the XM Radio home antenna cable into the home antenna cable adapter’s large input jack.
•Insert the home antenna cable adapter’s smaller cable into your XM2go receiver’s antenna jack.
•Make sure the XM Radio home antenna points south outdoors through a window.
ASSEMBLING THE INMOTION IMX2
Place the compatible XM2go receiver docking adapter onto the docking connector. Docking adapters are labeled for XM2go receiver identification.
POWER
Use one of the following two options to power your inMotion iMX2:
AC (WALL OUTLET) POWER
Insert the barrel connector from the power supply into the DC connector on the back of the inMotion iMX2. After this connection is made, insert the power supply into a wall outlet.
DC (BATTERY) POWER
Install four AA batteries (not included) into the battery compartments on the bottom of the inMotion iMX2 (two to each compartment). Make sure the batteries are installed as illustrated in the battery compartments.
START PLAYING
1.Place your XM2go receiver onto the docking connector.
2.Turn on your XM2go device.
3.Turn on the inMotion iMX2 by pushing the power button located on the top of the unit. A blue LED will light around the button when the power is on.
Note: To avoid hearing a popping sound when you turn on your inMotion iMX2, always turn on your audio source first.
POWER OFF
Turn off the inMotion iMX2 by pushing the power button located on the top of the unit. The LED will turn off.
AUTO SHUT-DOWN (STANDBY)
The inMotion iMX2 automatically shuts down (standby) if no audio is detected after three minutes. While this mode reduces battery consumption, it does not completely turn the inMotion iMX2 off. To maximize battery life when not using the inMotion iMX2, push the power button located on the top of the unit. The LED will turn off.
CONNECTING TO ALTERNATE AUDIO SOURCE
Connect an alternate audio source — such as a CD player, MP3 player, or portable DVD player — to your inMotion iMX2 by plugging one end of the lime-green audio input cable to the line out of your portable device (if it has one) or to the device’s headphone jack. Connect the other end to the input marked “AUX” on the back of the inMotion iMX2.
VOLUME
The “+” and “–” buttons on the top of the inMotion iMX2 are the master volume controls. Press and hold the “+” button to increase the volume and the “–” button to decrease the volume.
FOR ADDITIONAL BASS
Altec Lansing Inmotion Im3c Manual
The inMotion iMX2 is equipped with a subwoofer jack (“SUB OUT”). This output should only be used to connect an Altec Lansing optional subwoofer specifically designed to increase the bass output of this speaker system. Please check www.alteclansing.com for availability information.
TROUBLESHOOTING
SYMPTOM | POSSIBLE PROBLEM | SOLUTION |
Power LED is | The power supply isn’t connected to a wall outlet | Insert the barrel connector from the power supply into the DC connector |
not lit (AC | and/or the power supply connector is not plugged | on the back of the inMotion iMX2. After this connection is made, insert |
Operation). | into the DC connector on the back of the inMotion | the power supply into a wall outlet. |
iMX2. | ||
The surge protector (if used) isn’t powered on. | If the power supply is plugged into a surge protector, make sure the | |
surge protector is switched on. | ||
The wall outlet is not functioning. | Plug another device into the same wall outlet to confirm the outlet is | |
working. | ||
The power isn’t turned on. | Turn on the inMotion iMX2 by pushing the power button located on the | |
top of the unit. A blue LED will light around the button when the power | ||
is on. | ||
Power LED is | No batteries are installed. | Install four AA batteries (not included) into the battery compartments on |
not lit (Battery | the bottom of the inMotion iMX2 (two to each compartment). Make sure | |
Operation). | the batteries are installed as illustrated in the battery compartments. | |
The power isn’t turned on. | Turn on the inMotion iMX2 by pushing the power button located on the | |
top of the unit. A blue LED will light around the button when the power | ||
is on. | ||
No sound is | The XM Radio home antenna (not included) is not | Make sure the antenna points south outdoors or through a window. |
coming from | getting a signal. | Specific instructions and tips on how to improve signal reception can be |
speakers. | found in your XM2go receiver user’s guide. | |
The volume is set too low. | The “+” and “–” buttons on the top of the inMotion iMX2 are the master | |
volume controls. Press and hold the “+” button to increase the volume. | ||
The XM2go receiver is not correctly seated onto the | Remove the XM2go receiver and re-seat it in the docking station. | |
docking connector. | ||
The XM2go receiver is properly docked and the | Turn off the “mute” function on the XM2go device by pressing the mute | |
inMotion iMX2’s blue LED is lit, but the XM2go | button on the receiver or your remote control. | |
receiver is in the “mute” mode. | ||
If using an alternate audio source, the audio source | Connect an alternate audio source — such as a CD player, MP3 player, or | |
is not properly connected to the inMotion iMX2 or | portable DVD player — to your inMotion iMX2 by plugging one end of | |
there is a problem with the alternate audio source. | the lime-green audio input cable to the line out of your portable device | |
(if it has one) or to the device’s headphone jack. Connect the other end to | ||
the input marked “AUX” on the back of the inMotion iMX2. | ||
There is a | If using an alternate audio source, the audio source | Connect an alternate audio source — such as a CD player, MP3 player, or |
crackling sound | is not properly connected to the inMotion iMX2 or | portable DVD player — to your inMotion iMX2 by plugging one end of |
coming from | there is a problem with the alternate audio source. | the lime-green audio input cable to the line out of your portable device |
speakers. | (if it has one) or to the device’s headphone jack. Connect the other end to | |
the input marked “AUX” on the back of the inMotion iMX2. | ||
There is a | The volume level in operating system is set | Check the operating system volume level and decrease if necessary. |
crackling sound | too high. | |
coming from | ||
speakers (when | ||
connected to PC | ||
or laptop). | ||
The sound is | The volume level on inMotion iMX2 is set too high. | The “+” and “–” buttons on the top of the inMotion iMX2 are the master |
distorted. | volume controls. Press and hold the “–” button to decrease the volume. | |
There is radio | The unit is too close to a radio tower. | Move your speakers to see if the interference goes away. |
interference. |
encuentra dentro de un | ||||
La figura de relámpago que termina en punta de flecha | Precaución: | |||
y se encuentra dentro de un triángulo equilátero, tiene | no retire la | alertar al | ||
por finalidad alertar al usuario de la presencia de | hay piezas que | instrucciones de | ||
“voltaje peligroso” sin aislamiento en el interior del | servicio debe | en la literatura | ||
producto que podría tener potencia suficiente para | ||||
constituir riesgo de choque eléctrico para las personas. |
INMOTION IMX2
ACOPLE DE AUDIO PORTÁTIL
Gracias por comprar este producto de Altec Lansing. Por generaciones, Altec Lansing ha ocupado el primer puesto en innovación de audio. Hoy día, nuestra línea de parlantes amplificados ha recibido más premios por rendimiento que cualquier otra marca en el mercado. En todos los ámbitos de escritorio, en cualquier rango de precio, Altec Lansing ofrece el sonido de distinción — brindando aun a los clientes más exigentes el placer de audio que ellos buscan. ¡Sólo escuche esto!
CONTENIDO DE LA CAJA
Altec Lansing Inmotion Im3 Manual
SOLUCIÓN DE PROBLEMAS
SÍNTOMA | POSIBLE PROBLEMA | SOLUCIÓN |
El indicador LED | La fuente de suministro no está conectada a un | Inserte el conector cilíndrico de la fuente de suministro en el conector CC |
de encendido | tomacorriente de pared y /o el conector de la | ubicado en la parte posterior del inMotion iMX2. Después de hacer esta |
no está | fuente de suministro no está enchufado en el | conexión, inserte la fuente de suministro en un tomacorriente de pared. |
iluminado | conector CC ubicado en la parte posterior del | |
(Operación | inMotion iMX2. | |
de CA). | ||
El supresor de picos (si se utiliza) no está encendido. | Si la fuente de suministro está conectada a un supresor de picos, | |
asegúrese que el supresor de picos esté encendido. | ||
El tomacorriente de pared no funciona. | Enchufe otro dispositivo en el mismo tomacorriente de pared para | |
confirmar que está funcionando. | ||
El sistema no está encendido. | Encienda el inMotion iMX2 pulsando el botón de encendido ubicado en | |
la parte superior de la unidad. Un indicador LED azul se iluminará | ||
alrededor del botón cuando el sistema se encuentre encendido. | ||
El indicador LED | No hay baterías instaladas. | Instale cuatro baterías AA (no incluidas) en el compartimiento de las |
de encendido | baterías ubicado en la parte inferior del inMotion iMX2 (dos en cada | |
no está | compartimiento). Tenga cuidado de instalar las baterías tal como se indica | |
iluminado | en el compartimiento de baterías. | |
(Operación | ||
Encienda el inMotion iMX2 pulsando el botón de encendido ubicado en | ||
a batería). | El sistema no está encendido. | |
la parte superior de la unidad. Un indicador LED azul se iluminará | ||
alrededor del botón cuando el sistema se encuentre encendido. | ||
Los parlantes | La antena para el hogar XM Radio (no incluida) no | Asegúrese de que la antena para el hogar XM Radio señale hacia el sur al |
no emiten | proporciona ninguna señal. | exterior o a través de una ventana. Se puede encontrar instrucciones |
sonido alguno. | específicas y consejos de cómo mejorar la recepción de la señal en la guía | |
del usuario del receptor XM2go. | ||
El volumen está fijado demasiado bajo. | Los botones “+” y “–” ubicados en la parte superior del inMotion iMX2 | |
son los controles del volumen maestro. Presione y mantenga presionado | ||
el botón “+” para aumentar el volumen. | ||
El receptor xm2 no está correctamente colocado en | Retire el receptor XM2go y vuelva a colocarlo en la estación de acople. | |
la estación de acople. | ||
El receptor XM2go está acoplado de manera | Apague la función “mute” (silencio) en el dispositivo XM2go pulsando el | |
correcta y el INDICADOR LED azul del inMotion | botón de silencio en el receptor o su control remoto. | |
iMX2 está iluminado, pero el receptor XM2go se | ||
encuentra en el modo “mute” (silencio). | ||
Si está usando una fuente de audio alternativa, la | Conecte una fuente de audio alternativa — como un reproductor de CD, | |
fuente de audio no está conectada de manera | reproductor de MP3 o reproductor de DVD portátil — a su sistema | |
correcta al inMotion iMX2 o hay un problema con | inMotion iMX2 conectando un extremo del cable de entrada de audio de | |
la fuente de audio alternativa. | color verde lima a la línea de salida de su dispositivo portátil (si lo tuviera) | |
o en la clavija de audífono del mismo. Conecte el otro extremo de la | ||
entrada marcada como “AUX” en la parte posterior del inMotion iMX2. | ||
Los parlantes | Si está usando una fuente de audio alternativa, la | Conecte una fuente de audio alternativa — como un reproductor de CD, |
emiten un | fuente de audio no está conectada de manera | reproductor de MP3 o reproductor de DVD portátil — a su sistema |
sonido | correcta al sistema inMotion iMX2 o hay un | inMotion iMX2 conectando un extremo del cable de entrada de audio de |
crepitante. | problema con la fuente de audio alternativa. | color verde lima a la línea de salida de su dispositivo portátil (si lo tuviera) |
o en la clavija de audífonos del mismo. Conecte el otro extremo de la | ||
entrada marcada como “AUX” en la parte posterior del inMotion iMX2. | ||
Los parlantes | El nivel de volumen del sistema operativo está | Verifique el nivel de volumen del sistema operativo y disminúyalo si fuera |
emiten un | fijado demasiado alto. | necesario. |
sonido | ||
crepitante | ||
(cuando se | ||
conectan a la | ||
computadora o | ||
computadora | ||
portátil). | ||
El sonido está | El nivel de volumen del inMotion iMX2 está fijado | Los botones “+” y “–” ubicados en la parte superior del inMotion iMX2 |
distorsionado. | demasiado alto. | son los controles del volumen maestro. Presione y mantenga presionado |
el botón “–” para disminuir el volumen. | ||
Hay | La unidad se encuentra demasiado cerca de una | Mueva sus parlantes para ver si la interferencia desaparece. |
interferencia | torre de radio. | |
de radio. |
7
A10847 R01
To continue the download you need to go through the captcha:
This manual is encoded in PDF file format
The PDF (Portable Document Format) was created in the early 1990’s as a brand new way for computer users to share documents between each other, especially if one person has a PC and the other a Mac. The shared PDF will display exactly the same on both computers.
PDF was created by Adobe and is no maintained by the International Organisation for Standardisation (ISO). It is a very interactive format and can contain buttons, links, audio, video, form fields, business logic and even electronic signatures. It can capture fonts, images as well as document texts and can also format documents from many different programs.
Altec Lansing Ima699 Manual
Most PDF viewers or the software used to view the PDF is provided free of charge. There are many options available including Scribus, pdfTex, Adobe InDesign, Adobe Illustrator as well as Google Docs. The most popular however is Acrobat Reader DC.
Why we provide Altec Lansing Headphones manuals in PDF?:
Altec Lansing Inmotion Im310
- · PDF’s are incredibly convenient and are easy to open and read by everyone, regardless of whether they have a PC or Mac.
- · A PDF can be compressed into a file size that is easy to email while still maintaining the quality of the images.
- · A PDF file can be made incredibly secure as you can set up passwords, digital signatures and even watermarks.
- · A PDF allows you input many different types of content including images, animations, 3D models, hyperlinks and buttons.
PDF’s do have their drawbacks such as:
- · PDF’s can often be difficult to edit or to extract information from as it’s original intention was to make the exchange of documents easier.
- · There are different types of PDF’s, especially when searching or extracting information.
If you have a document that you would like to convert into a PDF, there are many sites online that will do the conversion for you for free and very quickly. The same is true if you are looking to convert from PDF format into a different format. This is often a much easier way to edit a PDF.